USD
Company news
Maintaining Your 300Bar PPC Air Compressor
Maintaining Your 300Bar PPC Air Compressor
High Pressure 300bar PCP Air compressor with Lock Oil Water Separator is a great unit for your industry.300bar pcp air compressor It offers three major benefits of the original 300bar PCH (Plasma Corrosion Chromium) filter, Lock Oil (Aero Thermoplastic), and Oil Catch Fluid. The product offers high pressure, high temperature operation and exceptional lubrication to extend the life of your equipment. It does not matter if you are running an industrial shop, or a small local business. The ability of this unit to stand up against the toughest competition, and still perform like a top of the line PCH filter is unmatched in the market.
The 300bar PPC is a very efficient product because it removes 99% of oil from the crankcase (the oil tank).300bar pcp air compressor 300bar pcp air compressor When oil builds up, it expands into a hard shell which prevents any airflow from reaching the crankcase. Also, when oil builds up it causes the bearings to rust internally. The bearing friction also adds wear and tear to bearings. This is where the lock oil system comes in to help out.
The air compressor locks in on the oil and then removes excess air from the crankcase.300bar pcp air compressor The oil is drained and the compressor turns off immediately. This is a great product for those who run their own business and use the air compressor at least one to two times per week for basic maintenance. If you run the PCH filter constantly it can create some negative effects and can become clogged.
Lock oil is an excellent solution to prevent oil buildup in your equipment and in the bearings. The lock oil system provides an additional layer of lubrication around the bearings that traditional oil cannot provide. Regular oil cannot penetrate as much of the metal as lock oil because it is not liquid and tends to stay on the surface. This allows the oil to remain in place on the bearings. The additional lubrication will help keep things running smoothly and make your PCH compressor run longer before needing an oil change.
Each time the PCH is used the oil must be drained from the oil tank. The oil will need to be replaced every three to six months depending on how often you use your pump. It is a good idea to take the compressor to a mechanic once every year and have him/her perform an inspection. The pump will need to be mounted on a pedestal and the oil tank removed to get to the oil. The technician will then refill the tank and reinstall the pump and controls on the air compressor.
The air compressor is designed with three tanks: an oil tank, a coolant tank, and a drain. The oil tank acts as a reservoir for the oil that is used in the compressor. This is continually refilled with oil as needed to maintain the operating temperature and prevent overheating. When you are finished using the air compressor, the coolant tank will be drained so it can be replaced with a new one. The drain is where the coolant is drained to help prevent overheating and allow the compressor to cool down before it is needed again. These three tanks are very important to a PCH because they ensure proper operation of the air compressors.
0users like this.
